Ronseal Direct Metal Paint White Gloss 750ml
Original price was: $24.00.$16.80Current price is: $16.80.
- Protect Your Information, Shop with Safe Payments
- Safe and Secure Shopping
- 100% High-Quality Guarantee
- 100% Quality Satisfaction
Our Direct to Metal Paint is a high quality water based paint that provides a tough and durable finish to your metal. This non drip, low odour paint has a quick recoat time and is showerproof in just 30 minutes. Direct to Metal Paint will protect your metal from rusting and provides a 15 year protection. It can be applied directly to rust with no primer needed and is ideal for interior and exterior bare metal, cast iron, galvanised steel, aluminium, stainless steel, wood and PVC.
When using Ronseal’s Direct to Metal Paint choose a dry day, above 10°C, when it’s not likely to rain. Make sure the metal is clean, dry and free from dirt, dust and grease and give the paint a really good stir for 2-3 minutes. Use a roller or brush to apply it, alternatively if you would prefer to spray this product, make sure you dilute the paint with about 10% water or to the spray specifications. 2 coats will provide sufficient coverage, but 3 coats are recommended for rusty surfaces and ultimate durability. Leave it to dry for 2-4 hours between each coat and after your last coat, it’ll be touch dry in 30 minutes.
To keep your metal looking its best, check for any imperfections every year. If you notice any cracks, blisters or scratches, sand off any loose bits and touch up the area with 2 coats of our Direct to Metal Paint.
- Provides a tough and durable finish to your metal for up to 15 years
- Can be applied directly to rust
- Showerproof in 30 minutes
- No primer needed
- Protects metal from rusting
| Material | Water Based |
|---|---|
| Range | Direct to Metal |
| For Interior Or Exterior | Both |
| Brand | Ronseal |
| Coverage Per Litre | 16 m2/litre |
| Coverage Per Tin | 4 m2 |
| Core Colour | White |
| Number Of Coats Recommended | 3 |
| Suitable For Surfaces | Bare metal, Cast iron, galvanised steel, aluminium, stainless steel, wood and PVC |
| Effects and Finish | Gloss |
| Safety Information | Not Hazardous Material |
| Additional Information | For bare metal, remove any loose rust or paint with a wire brush or 120 Grit sandpaper. Surfaces should be wiped down with a damp cloth to remove dust, dirt and grease. You can apply our Direct To Metal Paint directly to the surface without the need of a primer. For previously painted metal in good condition, lightly sand with 240 Grit sandpaper. Wipe with a damp cloth and remove flaking paint. Be careful preparing any surfaces that were painted before 1960, as they may be coated with lead paint. |
Be the first to review “Ronseal Direct Metal Paint White Gloss 750ml”
Related products
Reviews
There are no reviews yet.